Supervisory Quality Assurance Specialist

Summary This position is for a SUPERVISORY QUALITY ASSURANCE SPECIALIST, PD# D1819000 , part of the Nevada Air National Guard. This position is located in an Air National Guard Aviation Wing, Maintenance Group.The position serves as the Supervisor of the Quality Assurance Division. In that capacity, the supervisor plans, implements, and executes a quality assurance program that includes independent surveillance and evaluations of all assigned aircraft, aircraft components, and maintenance personnel. Responsibilities (1) Plans, organizes, and oversees the activities of the Quality Assurance Division. Develops goals and objectives that integrate organization and Quality objectives. Establishes, revises, or reviews policies, procedures, mission objectives, and organization design for the staff, as necessary to eliminate work problems or barriers to mission accomplishment, promote team building, and implement quality improvements in response to concerns with regulatory compliance. (2) Plans work to be accomplished by subordinates. Makes decisions on work problems presented by subordinate personnel. Establishes and develops performance standards. Evaluates subordinate personnel. Establish employee work schedules, deadlines, and production/inspection priorities based on aircraft maintenance status, aircraft mission requirements and other demand needs. (3) Manages, reviews and develops maintenance policy, advising supervisors and employees on both general policy and specific maintenance matters. Makes decisions and recommendations on technical concerns presented by supervisors. (4) Maintenance Standardization Evaluation Program (MSEP): Manages the Maintenance Standardization Evaluation Program (MSEP), which provides the Maintenance Group Commander and maintenance managers the visibility to assess and improve the proficiency of the work force, facilitate continuous process improvement, and provide the customer with high quality aircraft and components on time. (5) Ensures personnel use proper data collection techniques and procedures for evaluation, inspection and audit programs and a number of related databases and spreadsheets to capture and catalog data elements for trending, cross-tell, and benchmarking. (6) Directs and controls the management of the Technical Order Improvement Program and Suggestion Program for the wing. Assesses unit Reliability and Maintainability (R&M) concerns to determine if reported R&M deficiencies are caused by unit factors and local conditions versus those beyond the unit's control. (7) Manages critical compliance and configuration management programs. Oversees the Wing Foreign Object Damage and Dropped Object Prevention Program (DOPP) to ensure a sound prevention program is in place to eliminate potential life safety hazards. (8) Manages the Aircraft Weight and Balance, aircraft and equipment impoundment, chaffing, aircraft hot refuel/aircraft-to-aircraft, Product Quality Deficiency Report (QDR), and Over-G/Overspeed analysis programs. (9) Oversees and approves wing depot-level assistance requests. Reviews as necessary engineering disposition requests to the System Program Office (SPO). (10) Manages the Time Compliance Technical Orders (TCTO) and One Time Inspections (OTI) process. Reviews the applicability of TCTOs, and OTis to unit maintained equipment, determines surveillance and evaluation coverage based on the complexity of the TCTO/OTI as well as to the criticality of the system or the component to be modified. (11) Manages the Quality Assurance Surveillance Plan (QASP) to monitor Contractor Logistic Support (CLS) aircraft or Contract Field Team (CFT) as the government's on-site Quality Assurance Representative (QAR). (12) Represents and speaks for the Maintenance Group Commander with representatives of the National Guard Bureau, System Program Office (SPO) and internally within the Maintenance Complex on issues relating to maintenance processes, procedures, and policies. (13) Serves as the primary technical consultant to production area managers on issues related to quality, military specification, and international quality standards such as the International Organization for Standardization (14) Collaborates with the Maintenance Group Commander and other squadron commanders to plan, develop and implement numerous long term plans to include; Aircraft Modification Plan, Depot Input Plan, force management, weapon system conversions, base supplements, Aerospace Expeditionary Forces (AEF) participation, and others. (15) Manages the entire maintenance quality assurance program and the establishment of procedures for monitoring the quality of products in a maintenance environment using a broad knowledge of end items, systems, including quality characteristics and a comprehensive knowledge of manufacturing methods, special processes, interrelationship of various parts, systems, subsystems and end item components. (16) Manages and plans a quality assurance program using a variety of accepted quality assurance procedures such as statistical computations and data collections. (17) Skill in using various computer and software applications to include but not limited to: word processing programs, spreadsheets, email services, databases and database management. (18) Performs other duties as assigned. Requirements Conditions of Employment MILITARY REQUIREMENTS: Compatible military grade and assignment required prior to the effective date of placement. In compliance with Title 32 United States Code, the compatible military skill set is determined by the applicable service manpower requirements. Upon selection, individuals are assigned to the authorized position and its compatible military skill in accordance with Air force skill classification directives, statutes, and National Guard Bureau regulations. The Dual Status technician must obtain and maintain all military skill requirements in regard to training, education, certifications, experience. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position. Compatible Military Assignment: ENLISTED: E9 COMPATIBLE DAFSC: 2A590, 2A500, 2A600 *Other Requirements & Conditions of Employment: - National Guard Membership is required. - Males born after 31 December 1959 must be registered for Selective Service. - Federal employment suitability as determined by a background investigation. - Must be able to obtain and maintain the appropriate security clearance of the position. - May be required to successfully complete a probationary period. - Must maintain local network access. - Wear the uniform appropriate for the members' grade and component of the armed forces, maintaining standards of conduct and appearance. - This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. - Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. - May occasionally be required to work other than normal duty hours; overtime may be required. -The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission. - For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license. Qualifications In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities, to perform the duties of the specific position for which you are being considered. Education requirement is based upon the qualification standards for the specific position and is stated under the heading "EDUCATION". Your resume is the key means we have for evaluating your skills, knowledge, and abilities, as they relate to this position. Therefore, we encourage you to be clear and specific in describing your experience. EACH APPLICANT MUST FULLY SUBSTANTIATE (IN THEIR OWN WORDS) THAT THEY MEET THE REQUIREMENTS OF THE SPECIALIZED EXPERIENCE LISTED BELOW; OTHERWISE, THE APPLICANT WILL BE CONSIDERED UNQUALIFIED FOR THIS POSITION. DO NOT COPY FROM THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION OR YOU MAY BE DISQUALIFIED. GENERAL EXPERIENCE: Must have experience, education, or training involving planning, developing, or administering quality assurance programs (i.e., supporting the development, acquisition, production, use, maintenance, storage, and supply of products concerned with the systematic prevention of defects and non-conformances, the identification of unsatisfactory trends and conditions, and the correction of factors which may contribute to defective items). Experience using computer and automation systems. SPECIALIZED EXPERIENCE: Must have at least 36 months experience, education, or training involving a thorough knowledge of product or range of products involved, the manufacturing methods and techniques, special processes, test and performance requirements; and skill in developing plans and programs. Experience possessed by an expert in the area of specialization able to give technical direction to otherwise competent workers. Experience determining operations when difficult and questionable phases of malfunctions are found. Experience which required significant and concrete work accomplishments (i.e. special projects, working groups, or detailing assignments) involving interpersonal contacts in a quality assurance or related field. Experience in dealing with management principles and supervisory responsibility for the function required by type of position to be filled and the organization involved. Education There is no specific education requirement for this position. The applicant's record of experience and/or training must show possession of the knowledge, skills and abilities needed to fully perform the duties of the position. You must provide transcripts or other documentation to support your Training/Educational claims. To receive credit for Training/Education, you must provide documentation of proof that you meet the Training/Education requirements for this position. Additional Information - If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). - This is a Non-Bargaining Unit position. - Applicants who feel they have restoration rights to this position should contact the HRO. - Military Incentives - Bonuses and Student Loan Repayment Program: If you are selected for this position, you may lose your eligibility for your National Guard Enlistment/Reenlistment Bonus and/or Student Loan Repayment Program incentives. In order to avoid losing your incentive eligibility, you should check with your incentives manager prior to accepting an offer for the position. - Participation in Direct Deposit is mandatory. AREA OF CONSIDERATION: In accordance with the State Merit Placement Plan, candidates will be considered in order of their area of consideration category as appropriate. TERM POSITIONS: "Temporary-Not to Exceed" (TEMP) and "Temporary-Indefinite" (INDEFINITE) are considered to be TERM positions and are limited in duration to 4 years maximum. Employees reaching maximum TERM appointment limit of 4 years may be terminated. CONVERSION OF TERM (TEMPORARY/INDEFINITE) POSITIONS: Positions advertised as TEMP or INDEFINITE may be non-competitively converted to INDEFINITE or PERMANENT without further competition at a future date contingent upon available funding. For TEMP PROMOTIONS, position may be non-competitively converted upon expiration of the incumbent's USERRA rights. RECRUITMENT/RELOCATION INCENTIVE: Recruitment and/or Relocation incentives may be available, if eligible. Incentives are subject to funding availability and TAG-NV approval and are not guaranteed. PERMANENT CHANGE OF STATION (PCS): PCS funding is NOT authorized. If you do not reside in the location of the position, you will be required to relocate at your own expense. SELECTED RESERVE INCENTIVE PROGRAM: Acceptance of this position will cause termination of Federal bonuses pursuant to respective Selected Reserve Incentive Programs (SRIP). This termination may be with or without recoupment of payments already made. COVID19 - To ensure compliance with an applicable preliminary nationwide injunction, which may be supplemented, modified, or vacated, depending on the course of ongoing litigation, the Federal Government will take no action to implement or enforce the COVID-19 vaccination requirement pursuant to Executive Order 14043 on Requiring Coronavirus Disease 2019 Vaccination for Federal Employees. Therefore, to the extent a Federal job announcement includes the requirement that applicants must be fully vaccinated against COVID-19 pursuant to Executive Order 14043, that requirement does not currently apply. Federal agencies may request information regarding the vaccination status of selected applicants for the purposes of implementing other workplace safety protocols, such as protocols related to masking, physical distancing, testing, travel, and quarantine.

#J-18808-Ljbffr